Introduction

You are an extremely busy person always on the go. You don’t have the time to clean your house twice every day. You need something that can make the work easier for you. So you got a Robot vacuum cleaner. But now what?

Like any other home appliance, robot vacuum cleaners need to be taken care of. Without proper aftercare even the most expensive Robovac will start to malfunction.

If the scenario sounds familiar, don’t worry, you have come to the right place. In this article we will show you how to properly maintain your robot vacuum cleaner. Just keep on reading.

No stairs

Robot vacuums are small and round-shaped devices that are not meant to be newcastle carpet cleaning uneven surfaces. Stairs have steps in them and the robotic vacuum cleaner can easily fall off the steps and eventually break in two. 

Since they are not meant for uneven surfaces like that, it is advised that you should not be using your robotic vacuum cleaner on any stairs or steps. Instead, use a traditional vacuum cleaner or just sweep your stairs as you would normally. 

You can use your robotic vacuum cleaner to take care of the second floor completely as well as the first floor. Just clean your stairs separately.

Vacuum Proof Your House

Vacuum proofing your house is very important when you are using a robot vacuum cleaner. Again, a robot vacuum cleaner is a very small and round-shaped device that has tiny wheels on the bottom to propel it forward. 

If there is anything on the floor that obstructs its path, it is going to get tangled up and stop working. So, make sure you take anything out of the way.

Vacuum cleaners tend to get caught up on chords, items of clothing, and small toys. So, before you start your robot vacuum cleaner make sure you take out all the small things off of the floor. Keep the cords on the side or unplug your electronic devices that might be in the way.

Carpet Management

To understand carpet patterns you need to understand that robot vacuum cleaners work by using sensors. It works perfectly on hardwood floors or concrete floors but when you use it on carpet it has to sense through the patterns and that can be difficult.

Robot vacuum cleaners don’t work the best on dark coloured carpets. Especially if your carpet has black designs on it. The sensor would usually detect it as a gap in the floor and not clean on that part. 

So to get the best out of your robot vacuum cleaner you should choose carpets that are light coloured and don’t have a lot of black detailing on them.

This would not only keep your home looking clean it would also be more efficient for you to notice if the vacuum has missed any spots.

Deep Cleaning

Like any other home appliance, you need to clean your robot vacuum cleaner every once in a while. Every time you use the robot vacuum cleaner you have to clear out the dust box. 

Now, remember that the dust box on the robot vacuum cleaner is comparatively smaller than the new traditional vacuum cleaner dustbin. So, it needs to be emptied more often. And, if you keep emptying it, the vacuum cleaner would have longer battery life. 

But, in addition to cleaning out the dust box, you need to thoroughly clean the vacuum cleaner at least once a month.

Wheels

The wheels are the parts that keep the vacuum moving. This is the part of the device that is essential for the whole vacuum to be able to travel across the floor. It runs over dirt, dust, liquids, and all sorts of things that you drop on the floor.

So, it is very easy for the wheels to get clogged up.

Once a month, turn the vacuum off, turn it over and clean all the wheels. See if there are any hair strands stuck on it or if dirt has built up. Take a discarded tooth, then brush up and brush around it to get it completely clean and tidy.

Main Brush

Every robot vacuum has a main brush that constantly transfers the dirt and lint into the dust box. This is the core part of the device. As a result, this brush comes in contact with almost all of the dust being accumulated inside. 

So, just like the wheels, this main brush can also get tangled with hair, lint, and other things.

Make sure you check to see if somethings stuck onto the brush. Also check to see if any of the bristles are broken or bent. If there is anything that is stuck to the bristles, carefully cut it away. Make sure you don’t accidentally cut off the bristles.

Side brushes

There are tiny side brushes located on the sides of robot vacuums. These side brushes move in circles to bring the dust within the main brushes reach. Since these brushes make fast movements, it is easy for them to get bent and warped.

Luckily, they are very easy to fix.

First check to see which of the bristles are bent. Then heat the plastic up with a regular hair drier and slowly straighten them back. Wear a protective glove to avoid hurting yourself.

If you enjoy reading such topics related to cleaning, then visit thecleanhouseguide.com for more such content.

Conclusion

If you stay a little bit alert, you can notice the signs of damage before they actually happen. Robot vacuums aren’t cheap. If you are going to spend so much money for something that makes your day more convenient, it is best to maintain that device as well.

If you read this article thoroughly and pay attention to detail you’ll be on top of your cleaning game. Maintaining your robot vacuum well will not only extend its lifetime, but also improve its quality of work. Good luck!