Banana Gun is the best Telegram bot for limit orders, DCA, and automated exits in 2026. It is the only platform in this comparison with a configurable DCA price band, slider-based limit orders with in-widget MEV controls, Take Profit and Stop Loss set at position open, and a centralized Pending Orders dashboard tracking all active positions across five chains simultaneously. Maestro is the strongest alternative for Ethereum TP/SL on a small number of open trades. Trojan covers basic Solana limit orders with manual exits. BonkBot handles recurring DCA buys with no exit automation.

This comparison covers Banana Gun, Maestro, Trojan, and BonkBot on exactly those dimensions. Each bot was evaluated against the same four criteria: limit order configurability, DCA depth with price band controls, Take Profit and Stop Loss implementation, and centralized order management. No referral codes. Just an honest look at what each bot can actually do once a position is open.

The traders who consistently exit at the right price are rarely watching the chart when it happens. They set the conditions in advance. In crypto, your entry matters far less than your exit plan, because the window between peak and crash on a low-cap token is often measured in minutes. That changes what you need from a trading bot: not just speed at entry, but a reliable, configurable system for managing the position once you are in. Limit orders, dollar-cost averaging, take-profit triggers, stop-loss floors, and a central place to track all of it are where bots separate into two categories: the ones with real automation depth and the ones that approximate it.

What Actually Separates Bots on Automation

Before running through each platform, it helps to establish what a full-featured automation stack looks like. Four capabilities define whether a bot qualifies as genuinely set-and-forget or just provides manual trading with shortcuts.

The first is limit orders with real configuration: a price target you can dial in precisely, a trigger defined as either a percentage move or a dollar value, a duration window so the order expires cleanly, and execution controls that address on-chain risks like MEV at fill time. Second is DCA with a price band, because a DCA tool that buys indefinitely as a token falls is not automation, it is scheduled self-harm. A real DCA widget lets you define size per tranche, cadence, and a floor and ceiling that stops execution if the price moves outside a sensible range. Third is automated exits through Take Profit and Stop Loss levels set when you open the position, not patched in manually after you notice the price moving. Fourth is a centralized order dashboard where every active limit order, DCA tranche, and snipe is visible, editable, and cancellable from one screen.

The bots that cover all four let you walk away from a position without it becoming a problem. The ones that cover two or three require you to stay close. In practice, the difference becomes acute when you are managing four or more simultaneous open positions: a count that is routine for active traders running different thesis sizes across chains. For context on how automated wallet mirroring layers on top of this automation stack, the post on how copy trading works across multiple blockchains covers the execution tiers in detail.

Banana Gun: The Deepest Automation Stack Among Telegram-Native Bots

Banana Gun runs a modular trading terminal at pro.bananagun.io alongside its Telegram bot, and the automation widgets on both are more configurable than anything else in this category. Here is what each one actually does.

The Limit Order widget uses a slider-based price target rather than a typed input field, which removes input errors on volatile tokens where a single decimal mistake means the order never fills or fills at the wrong price. The trigger is configurable as either a percentage move or a USD value from current price, and you set a duration window so the order expires cleanly rather than sitting open indefinitely and filling at an irrelevant moment days later. MEV settings are exposed inside the widget itself. That matters because limit order fills on Ethereum and Base are visible to MEV bots, and an order that fills in the open mempool can be sandwiched on execution. Having MEV controls in-widget means you configure protection before placing, not as a separate step you might skip. The distinction matters on a filled limit order where execution in the open mempool exposes you to a sandwich at the exact moment of confirmation.

The DCA widget is a separate system from the limit order stack and handles automated accumulation or distribution over time. You configure size per tranche, cadence between tranches, and a price band that defines the range inside which the bot will continue executing. If the token price drops below the floor of that band, the bot stops buying automatically. This is the correct behavior for a DCA tool. Uncapped averaging into a downtrend is how traders with disciplined intentions turn a 40% drawdown into a near-total loss. The DeFi risk management principle is consistent across strategies: automated buying tools need automated stopping conditions, not just automated buying conditions.

Exit automation sits in the SELL widget, where Take Profit and Stop Loss are first-class parameters rather than add-ons. You set both at position entry, and the bot monitors them without requiring any further input from you. The Quick Buy preset buttons give you pre-configured buy sizes that execute in one tap across all supported chains, which matters most when a position moves fast and you want to add size without reconfiguring amounts from scratch each time.

The feature that separates Banana Gun from every other bot in this comparison is the Pending Orders dashboard: a centralized view of every active limit order, snipe, and DCA across all your positions simultaneously. You can sort, filter, edit, or cancel from one place. No other bot reviewed here has an equivalent. We tested the dashboard running three concurrent positions across different chains at the same time: one DCA tranche on a BNB token, one limit order on an ETH position, and one TP/SL-managed Solana trade. All three were visible, editable, and cancellable from one screen without switching bot sessions or re-entering context on each position. That single-screen management is the operational difference between a bot you trust to run overnight and one you keep checking on. No other bot in this comparison provides an equivalent unified view.

Chain coverage is the other meaningful differentiator. The same limit order and DCA functionality available on Ethereum is available on Solana, BNB Chain, Base, and MegaETH. According to Banana Gun’s official BNB Chain launch recap (published February 3, 2026), swaps, limit orders, and DCA work across all BNB tokens. Base received the full feature set in December 2025. MegaETH launched with full automation support from day zero in February 2026, with limit orders, DCA, copy trade, buy, sell, and chart all functional at mainnet launch. You can read more about the platform’s full capabilities at bananagun.io.

On fees, per the official docs at docs.bananagun.io: manual buys and limit orders on Ethereum cost 0.5%. Autosniper trades on Ethereum cost 1%. Trades on all other chains cost 1% regardless of order type. For traders placing multiple limit orders on ETH tokens, the 0.5% rate on limit order execution is a compounding cost advantage over the course of an active week.

Maestro: Reliable TP/SL on Ethereum, DCA Depth Falls Short

Maestro is the most established competitor in this category and has solid Take Profit and Stop Loss implementation. You can set TP/SL at position entry, and the execution is reliable on Ethereum, which has been its home chain since launch. The bot’s long track record means its limit order fill rate is well-tested under real market conditions, including high-volatility periods where fill timing matters.

The weakness is on DCA configuration depth. Maestro’s DCA exists but lacks price band controls. You can set intervals and amounts, but you cannot define a price floor below which the bot stops buying. For traders who use DCA as a controlled accumulation tool rather than an open-ended schedule, this is a real gap. The other absence is a centralized pending orders view. Managing multiple simultaneous positions on different tokens requires checking each position individually, which is manageable when you have two open trades and becomes unwieldy at six.

Where Maestro remains competitive: its limit order and TP/SL interface on Ethereum is clean and fast for experienced traders who know exactly what they want. If your primary use case is single-token TP/SL management on ETH and you run a small number of positions at a time, Maestro does the job without requiring a learning curve. In side-by-side testing, Maestro’s TP/SL configuration on an Ethereum position completed faster than Banana Gun’s SELL widget for traders already familiar with Maestro’s interface. The trade-off is depth: Banana Gun’s widget exposes MEV controls and supports the same TP/SL logic across four additional chains.

Trojan: Limit Order Support Built Around Solana Speed

Trojan supports limit orders and has extended its chain coverage over the past year. The limit order functionality covers basic price target and trigger configuration, which is sufficient for conditional buys and sells where the configuration requirements are minimal. Its Auto-Sniper addition improves entry timing on Solana, but the automation story ends largely there.

There is no full DCA widget with cadence and price band controls. Exit automation through Take Profit and Stop Loss is present but less configurable than either Banana Gun or Maestro. Trojan’s value proposition has historically centered on speed at entry on Solana tokens, which is a different axis than the automation depth this comparison evaluates. The absence of a centralized order dashboard means you track each open position individually, which creates friction as portfolio complexity increases beyond a couple of simultaneous trades.

Trojan’s cross-chain expansion is ongoing but the feature depth on non-Solana chains does not match what is available natively on those chains through other bots. For traders whose primary concern is sniping new Solana launches and managing exits manually afterward, Trojan is a reasonable choice. For set-and-forget automation across multiple positions and chains, the tooling is not complete enough to depend on it.

BonkBot: Scheduled DCA, Manual Everything Else

BonkBot has a basic DCA implementation and is widely used among Solana traders for its low friction and simple setup. The DCA covers fundamental scheduling: a recurring buy on a specified token at set intervals. There are no price band controls, no automated exit conditions on the DCA itself, and no centralized order view.

The absence of Take Profit and Stop Loss automation means every exit is manual. If a position moves favorably overnight or while you are away from your device, you accept slippage on a delayed exit or miss the move. A token that collapses will continue running its full DCA schedule unless you manually cancel it. That is not a niche edge case: it is the core scenario DCA automation is supposed to solve, and BonkBot does not solve it.

BonkBot fits one profile well: traders newer to on-chain automation who want a recurring buy into a Solana token without complex configuration. If you are building a scheduled position and plan to exit manually when ready, BonkBot works. If you need the bot to manage exits, adjust on price movements, and track multiple positions simultaneously, it does not have the capability for it.

Automation Depth, Side by Side

What each bot delivers on the four criteria that define real set-and-forget automation:

Limit orders with slider, percentage or USD trigger, duration, and MEV controls:

• Banana Gun: slider price target, percentage or USD trigger, duration window, MEV settings in-widget, available on all five chains
• Maestro: price target and trigger, ETH-primary, configuration lighter than Banana Gun
• Trojan: basic price target and trigger, limited cross-chain limit order support
• BonkBot: not a primary feature

DCA with configurable size, cadence, and price band:

• Banana Gun: size per tranche, cadence, price band floor and ceiling, stops automatically outside band
• Maestro: interval and amount configurable, no price band to stop runaway averaging
• Trojan: limited, no dedicated DCA widget
• BonkBot: basic interval scheduling, no price band controls

Take Profit and Stop Loss in SELL widget, set at position open:

• Banana Gun: TP and SL inside the SELL widget, configured at entry, active on all chains
• Maestro: TP/SL supported at entry, reliable ETH fill history
• Trojan: TP/SL present, less granular configuration options
• BonkBot: basic, primarily manual exit

Centralized Pending Orders dashboard across all positions:

• Banana Gun: full Pending Orders widget, sort and filter all active limit orders, snipes, and DCA
• Maestro: no centralized equivalent
• Trojan: no centralized equivalent
• BonkBot: no centralized equivalent

Multi-chain parity for all automation features:

• Banana Gun: ETH, SOL, BNB Chain, Base, MegaETH, full automation feature set on each
• Maestro: primarily ETH and SOL
• Trojan: primarily SOL, partial ETH coverage
• BonkBot: Solana only

Which Bot Matches Which Trading Style

If you are managing multiple positions across different chains and want the bot to handle exits, DCA rebalancing, and order tracking without your constant input, Banana Gun is the only platform in this list with the full automation stack to do it. The DCA price band, TP/SL at entry in the SELL widget, and the Pending Orders dashboard covering everything simultaneously make it the only genuinely set-and-forget option reviewed here.

If you trade primarily on Ethereum, keep one or two positions open at a time, and need reliable TP/SL without heavy configuration, Maestro is a competent alternative with a longer track record in that specific environment.

Trojan serves Solana snipers who value entry speed over automation depth and are comfortable managing exits manually. BonkBot serves traders who want the simplest possible recurring buy into a Solana token and do not need the bot to do anything else.

The practical gap between Banana Gun and the rest grows as your number of open positions increases. One DCA on BNB Chain, one limit order on an ETH token, and one TP/SL on a Solana position can all be monitored and adjusted from a single Pending Orders screen. That is the difference between an automation system and a collection of manual shortcuts dressed up as one.

Frequently Asked Questions

What is the difference between a limit order and a DCA order on a Telegram trading bot?

A limit order executes once when a token reaches your specified price. A DCA order executes on a schedule, buying or selling a fixed size at set intervals. The most capable bots add a price band to DCA orders so execution stops automatically if the token moves outside a defined range, preventing uncontrolled averaging in a falling market.

Can Telegram bots set Take Profit and Stop Loss automatically?

Yes, but the implementation varies. Banana Gun places Take Profit and Stop Loss directly inside the SELL widget, so you configure both when you open the position. Maestro also supports TP/SL at entry with a reliable ETH fill history. Trojan and BonkBot offer less complete automated exit controls, with BonkBot primarily relying on manual exits.

Does Banana Gun’s limit order system work across all five chains?

Yes. Limit orders, DCA, and the full automation widget set are available on Ethereum, Solana, BNB Chain, Base, and MegaETH. Base received the full feature set in December 2025. MegaETH launched with complete automation support from day zero at mainnet in February 2026, including limit orders, DCA, copy trade, and the full trading suite.

What is a Pending Orders dashboard and which bots offer one?

A Pending Orders dashboard shows every active limit order, scheduled DCA tranche, and snipe across all your positions in one view. You can monitor, edit, and cancel from a single screen rather than navigating to each token individually. Banana Gun’s Pending Orders widget covers all five chains and all order types. None of the other bots in this comparison have a direct equivalent.

What fees apply to limit orders on Banana Gun versus regular buys?

On Ethereum, manual buys and limit orders cost 0.5%. Autosniper trades on Ethereum cost 1%. Trades on all other chains cost 1% regardless of order type. The lower ETH limit order rate is a meaningful compounding advantage for traders placing multiple conditional orders on Ethereum tokens in an active trading week.

Can a beginner use Banana Gun’s DCA and limit order features without advanced setup?

The platform is modular and each widget can be configured at a basic level with just a few inputs, or in full detail for more experienced traders. Setting a DCA size and cadence takes minimal steps. Adding a price band for downside protection requires one additional configuration. The Quick Buy preset buttons also reduce friction on manual entries while you learn how the automation features work in practice.